Big Joe
Despite its tiny size, the 'Big Joe' outputs 8 watts per channel into 8 ohms, suitable for most loudspeakers with sensitivity above 88db. Like a true high end amplifier, it will double it's power output into 4 ohms, producing 16 watts per channel. 'Big Joe' provides astonishingly clean and transparent sound at surprisingly loud levels.

The 'Big Joe' is equipped with a volume control to avoid the need to use a preamp, but an internal shunt control allows the freedom to use one if desired. The Big Joe is perfect for full range systems or your office/bedroom setup. The performance is nothing short of amazing!

Front Panel: Volume control.

Back Panel: Left and right analogue audio input via RCA, speaker output terminal via banana type connectors, gain switch, power switch and power input socket.

Specifications
• Extra low output resistance (Zo less than 0.01 ohms)
• High current capacity (1A per channel)
• 6Hz - 300KHz ; -1dB at 8 ohms loading
• Very low noise
• Maximum output 8 watts into 8 ohms
• 16 watts into 4 ohms
• Internal gain control switch (Low/High)
• OP amplifiers exchangeable
• Size: 11cm(L) X 8cm(W) X 5cm(H)
• Weight: 550g